• identification of the manufacturer
• number of the standard
• symbol for impact resistance (see * below)
(voir * ci-dessous).
• CE symbol
* - F indicates this eye protector provides protection against low energy impact from high speed particles.
* - S indicates the frame is classified as having General Increased Robustness.

1 - indicates class 1 optical quality (1= for permanent usage and precise work).
F - indicates that the eyeprotector provides protection against low energy impact from high speed particles at room temperature only.
S- indicates the lens is classified as having General Increased Robustness.

•Clear lens marked with shade number 2-1.2 filters out 99% of harmful UV radiation to 380 nm but do not protect against sunglare.
• Smoke lens marked with shade number 5-2.5 offers adequate protection against sunglare.
• Green lens marked 5 offers protection against Infra Red Radiation (IR) during welding and braze welding operations to a maximum gas flow rate of 200 litters/hour

•Ensure that replacement lens’ marking is the same as the frame before fitting to the eye protector.
• The materials used in the eyeprotector may cause an allergic reaction to the skin of susceptible wearers.
• If any reaction is observed, doctor’s advise should be sought immediately.
• Scratched or pitted lens should be replaced immediately.
• Under normal usage and correct storage the product should offer sufficient protection for two years.
The eyeprotector should be transported in the bag that it was originally supplied in.
• Our models are certified by notified bodies.

The eyeprotector should be stored away from direct sunlight and abrasive chemicals. The lens should be cleaned with a soft cloth in warm soapy water.
The eyeprotector can be disinfected with any common household disinfectant.